|  The
Itabar flow sensors measures the flow of gases, steam and liquids regardless
of the properties of the substance.
FEATURES / ADVANTAGES
- Suitable for measuring the flow of liquid and gaseous media
- pipe diameters from 0,6 to 472 inches
- Materials: 1.4571 and 1.4539 steel alloys / Inconel / Tantalum /
Hastelloy C4
- Low assembly costs thanks to simple installation concept
- Reduced pressure losses in comparison with orifice-meters (energy
savings ).
- Existing pipes do not to be cut
- Accuracy ± 1% of measured value
- Operating temperatures: - 100 °C to + 1200 °C ( -148°F
to + 2192°F)
- Operating pressures: 0.5 to 600 bar abs. (7,242 to 8702,27 PSI A)
- Volumetric flue gas measurement for stack gas scrubber plants; model
IBF-100 sensors need not to be removed from the stack for cleaning;
flue diameter up to 12,000 mm (472,44 inch)
- Flow line can be round or angular
- In case of contaminated medias ITABAR flow sensors can be equipped
with an air purge unit.
VERSION FOR SATURATED STEAM AND SUPERHEATED STEAM
 ITABAR
type: IBFD flow sensors for saturated steam and superheated steam have
proven their qualities in all areas of power generation and industrial
and process technologies. In order to guarantee the greatest possible
operational safety, ITABAR sensors are manufactured and tested in accordance
with the Technical Guidelines for Steam Vessels (TRD) and / or the ASME
Boiler and Pressure Vessels Code.
- Pipe diameters:
- 40 - 1000 mm (IBFD) (1,575 to 40 inch)
- 100 - 600 mm (IBFD-HT/- HTG) (4 to 24 inch)
 Operation
conditions IBFD
- max 550 °C at 40 bar (higher operating data on request)
- Operation conditions IBFD-HT/-HTG
- 160 bar at 590 °C
- 400 bar at 300 °C
|
