Graver Pleated HighFlow Filter
General Description
Graver High Flow Series filters feature a larger geometry to
handle higher flows with fewer filter elements. The result is
much faster, easier filter changeouts. In addition, the inside
to outside flow allows for excellent dirt holding capacity,
extending the time between filter changeouts. Filter housings
are also available and because of the filters high flow and
dirt holding capacity, smaller systems are possible, reducing
upfront capital costs.
Technical Description
Recommended change-out D.P. | 2.4 bar |
Max. Flow rates | 60” element up to 1892 lpm 40” element up to 1325 lpm 20” element up to 662 lpm |
Max. Operating Temp. |
82°C @ 1.4 bar 71°C @ 2.1 bar 25°C @ 3.4 bar |
Grades | 1, 3, 5, 10, 20, 40, 60, 100 |
Media | Polypropylene |
Hardware | Polypropylene |
Lengths | 20", 40", 60" |
Efficiency | Nominal Beta 10 |
Gasket/O-Rings | EPDM, Silicone, Buna N, Viton |